No Motioninjoy
Remove drivers from v1.6. Connect all your devices. For this procedure to work properly make sure you've got your controller (s) and Bluetooth dongle (s) connected. If you don't have enough USB ports just repeat the described steps for each device, plugging it in one after another. Download and run the DriverStore Explorer tool. Download Ps3 Controller Folder. Posted by Xhoi Xhani at. My pc can't open scp sever. Retsth December 13, 2018 at 11.
This Windows 10 tutorial will show you how to connect a PlayStation 3 controller to your PC or laptop via Bluetooth, using a third party driver without using Motioninjoy.
Once the PS3 controller has connected and setup you will be able to use it to play your PC games, which is great if you want to game with more comfort using a great controller like this one.
For the PS3 controller to connect to your Windows 10 PC using Bluetooth you will need to make sure; you have met all the requirements as listed below, install a third-party driver (Dual Shock 3-4 SCP) and you will also need Windows WinRAR software installed to extract the compressed folder.
- Just wanted to say that i had my ps3 controller working with wires but not via bluetooth by installing scp server with ps3 ps4 and force option enabled. So to fix the bluetooth part i went to control panel, devices and properties of the xbox controller and inside there i updated the driver and looked for one in.
- Connect PS3/PS4 Controller to Windows in 5 Minutes Easy: Did you know that you can use your PS3 / PS4 controller to play games on the PC. This is possible via the SCP Toolkit (with step by step instructions on how to set up) and Bluetooth/USB on the Playstation controllers.
- Hi im bringing a SOLUTION to the bluetooth problem on knock off controllers of PS3/PS4 in the Scp Toolkit software that you can download it here to make it work on your PC as explained here. The file ScpControl.dll here is for the version 1.7.277.16103 so first check if your version is that and this modded file can fix a lot of fake PS3.
Requirements & download links For Dual Shock 3-4 SCP Bluetooth Driver:
1. Microsoft .NET 4.0
2. Visual C 2010 Runtime.
3. Latest DirectX Runtime.
4. Latest Xbox 360 Controller Drivers available.
5. Genuine Sony DualShock3 or DualShock4 or SixAxis Controller(s).
6. Minimum of Bluetooth 2.0 + EDR Dongle (if using Bluetooth). [DualShock4 requires minimum of Bluetooth 2.1 + EDR Dongle]
7. Administrator rights on your PC.
8. Download WinRAR
9. Download SCP Bluetooth Driver Here
****Top Tip****
Create a system restore point before installing any of the above
To Connect PS3 Controller to PC or Laptop:
1. Check you have all the requirements listed above. (If you don’t have requirements 1-4 installed then click on their links to install them)
2. If you don’t have any folder extraction software then click on the WinRAR link above (Requirements step 8) > Click on a correct version to install > Save file > Run setup file > Press install after agreeing to Terms & Conditions > Press OK
3. Click on Download SCP Bluetooth Driver link above (Requirements step 9) > Click download on the right hand side of the page > Save file
4. Once the file has downloaded Open File Explorer > Open Downloads folder > Move SCP Driver Package to the location of your choice on your PC (E.g Desktop) > Right-click > Extract Here
5. Open the Scp Server Folder that’s just been extracted > Click ‘Bin’ > Right click on ScpDriver > Run as administrator
6. Plug in your PS3 controller into a USB port using the PS3 cable (All four lights on the controller should be flashing)
7. Turn on your Bluetooth on your PC or Laptop or plug in a Bluetooth adapter
8. Tick box for ‘Force install’, ‘Configure Service’ and ‘Bluetooth Driver’ > Press install (Once the driver has installed successfully light number one on PS3 controller should flash)
9. Disconnect PS3 controller > Restart PC > Plug in and turn on PS3 controller (Light number one on PS3 controller should have a solid light – no flashing)
If you don’t have a solid light on the PS3 controller after restarting your PC do the following:
- Unplug PS3 controller
- Open the Scp Server Folder > Click ‘Bin’ > Right-click on ScpServer.exe > Run as administrator (will say disconnected at the top)
- Plug in PS3 controller > Press PS button on controller (Number one light should light up on controller) > Unplug PS3 cable
- Open ScpMonitor (Should be an icon in system tray) > Controller will say connected
After all these steps you can now play your PC games with your PS3 controller
****Top Tip****
If you are still having issues connecting make sure your Bluetooth is enabled and/or check that your Bluetooth adapter is working.
Scp Server Ps3 Host Address Error
Check out the video tutorial below on How to Connect A PS3 Controller to Windows 10 On PC Or Laptop if you are getting stuck: